![]() They can all be adjusted relatively close to the strings. ![]() The Virtual Vintage® 2.1, 2.2 and VirtuAL 2® models have low magnet pull, and so do the Virtual T™ and all of the Fast Track™ models, including the Chopper™, Cruiser® and Pro Track™. ![]() Once the bridge pickup is adjusted to a useful distance, the neck pickup can be adjusted by ear for a good balance.įor single-coil pickups and all hum canceling single-coil replacements with Alnico 5 rod magnets, we’ve found the following formula works very well: at the highest fret (usually the 21st or 22nd), the closest recommended distances from the top of the magnet to the bottom of the string are: Their polepieces should be adjusted (if necessary) by ear in relation to the volume established for the first and sixth strings. There are no recommended distances for the other 4 strings. For standard, full-size humbuckers, a reasonable starting point for the bridge pickup is at least 1/16" (1.5mm) from the high E and 5/64" (2 mm) from the low E. We measure string height from the top of the polepiece to the bottom of the string when the string (usually the high or low E) is held down at the highest fret. There is no specific distance that works best for everyone.
0 Comments
Leave a Reply. |